Halo Jellie Glue UV/LED Adhesive for Jellie Tips 15g

Halo Jellie Glue UV/LED Adhesive for Jellie Tips (15g) is formulated with an unusually thick consistency, allowing you to scoop it up using your chosen Halo Jellie Tip for the ideal quantity. The thick consistency fills any imperfections in the natural nail and avoids the possibility of air bubbles being trapped between the nail and Jellie Tip, preventing lifting and ensuring a longer-lasting manicure.

Flash curing is made easier by this glue since the tip does not need to be held in place - simply glue and cure in a Halo Smart Lamp Pro or Flash Cure Lamp. Alternatively, you could also opt to cure all 5 fingers at once for a rapid process. Completely cruelty-free & vegan-friendly.

Directions of use:

• Complete prep and cuticle work as normal on clean and natural nails. Remove any debris from nails, using a Halo Plush Brush and Halo Prep & Scrub.
• Size the Halo Jellie Tips to your nail beds, ensuring they fit perfectly from side wall to side wall, without needing to push the tip flat to the nail bed.
• Apply Halo Flexi-Bond or Halo Rubber Base Coat to the nail and cure for 30 seconds.
• Scoop a small amount of Jellie Glue onto the contact area of the Jellie Tip. Alternatively, if opting to use Jellie Brush-On Glue, paint glue onto the contact area of the Jellie Tip.
• Place the Jellie Tip on to the nail plate by tilting the tip at an angle, placing the cuticle area first. Slowly press the rest of the Jellie Tip down so that it fits perfectly with no air bubbles. Remove any Jellie Glue that may have escaped from under the tip.
• Hold the Jellie Tip down and flash cure, using a Smart Dual Cure Lamp or a Flash Cure Lamp. Once all tips are applied, cure the whole hand for 30 seconds.
• Cut the Jellie Tip down to size and shape if required. Buff over the Jellie Tip to remove the shine and carefully around the cuticle area to ensure it sits flush.
• Apply Prep & Scrub using the Halo Plush Brush to remove any dust and debris. Apply Halo Base Coat, colour of choice and top coat, curing each layer for 30 seconds.
• Allow the nails to cool down for two minutes before applying Halo Cuticle Feed.